Performance Parameters of the Device	Details
Type	Freeze liquefied, air-cooled, hand-pushed mobile
Working environment temperature	-10 ℃~40 ℃
Initial pressure (MPa)	0.8
Recovery final pressure (MPa)	≤ 0.053
Time required for 1m³ volume (h/m³) *	≤ 0.5
Initial pressure (Pa)	≤ 133
Inflation final pressure (MPa)	0.7
Time required for 1m³ volume (h/m³)	≤ 0.2
Vacuumizing from 0.1MPa to 133Pa takes time (h/m³) **	≤ 1.0
Ultimate vacuum (Pa)	≤ 10
Vacuum maintained at 133Pa for 24 hours with an increase value (Pa)	≤ 400
Annual leakage rate	≤ 1%
SF6 moisture content after recycling (PPM/V)***	≤ 60
Gas purity and oil content (PPM/G)	≤ 10
Storage method	Liquid
Storage pressure (MPa)	8
Capacity (L)	100
Gas storage capacity (kg)	100
Drying filter regeneration method	Vacuum heating activation regeneration

2. Power supply three-phase four wire system 3 Φ 230V

Parameter	Specification
Total power (kW)	≤ 10
Noise dB (A)	≤ 75

3. Main component performance parameters

Parameter	Details
Form	Semi enclosed
Theoretical displacement	18 m³/h
Maximum exhaust pressure	3.5 MPa
Allowable exhaust pressure	3.0 MPa
SF6 compressor
Minimum allowable suction pressure	53 KPa
Maximum allowable suction pressure	1.0 MPa
Maximum exhaust temperature	130 ℃
Power	2.2 kW
Power supply	3 Φ 230V 60Hz
Extraction rate	15 L/s
Vacuum pump ultimate vacuum	≤ 15 Pa
Lubricating oil	HD25 refrigeration oil
Container
Category	2
Design pressure	8 MPa
Design temperature	45 ℃
Capacity	100 L
Storage capacity	100 kg

4. Transportation parameters

Inquiry Cart 0